Study on optimal control strategy for regulated two-stage turbocharged diesel engine during transient process

Journal of Mechanical Science and Technology - Controlling the turbo bypass valve is valid to enhance transient characteristic of turbocharging system. Appropriate fuel delivery is beneficial to...     

泛型直线螺线管型电磁阀运动分析和改进的电压控制

在直线螺线管型高速电磁阀的整个运动过程中，由于铁磁材料的磁化需要一个动态过程，导致其电磁吸力随着铁磁材料的磁化而变化。为了获得一种不依赖电磁阀材料各异性的最优电压控制方法，从静态磁场出发，由电磁阀的理论静态吸力公式建立电磁阀衔铁的动力学模型，通过分析电磁阀的衔铁启动过程，上升运动过程和下落过程，得到各阶段的位移、电流随时间的变化。然后经过前面过程分析得到了采用两段梯形电压控制电磁阀的控制策略，实现了精准控制占空比的目的。     

Numerical investigation of dual-fuel direct injection on RCCI combustion performance at low load condition

Journal of Mechanical Science and Technology - A numerical study was performed to investigate the combustion characteristics of hydrogenated catalytic biodiesel (HCB)/gasoline reactivity controlled...     

Contributions of oxygen vacancies to the hydrogen evolution catalytic activity of tungsten oxides

The tungsten trioxide attracts less attention due to the low electron transfer kinetics that hinders the interaction of electrons and ions during the hydrogen evolution reaction (HER). But the oxygen vacancy strategy can inspire its electrocatalytic activity for HER because it has a positive effect on improving the charge transfer and compensating for the weak hydrogen adsorption of the tungsten trioxide. By synthesizing a series of substoichiometric tungsten oxides, we reveal the linear relationship between the catalytic activity and the content of oxygen vacancies, which indicates that the oxygen vacancy strategy is an achievable route to enhance the HER for metal oxides.     

用于疏浚工程泥浆密度测量的电阻层析成像技术

江河湖海疏浚工程对于拓展和保障航运安全、促进生态恢复、维护/改善远海岛礁环境具有不可或缺的作用.目前,在绞吸和耙吸疏浚船上,多采用射线密度计及电磁流量计对输泥密度、产量等进行在线计量,并作为实现疏浚系统自动控制的重要参量.由于射线密度计潜在的人员健康、公共安全和环保风险,在一些国家和地区已建立了放射源的有序退出机制.电阻层析成像使用安装于管壁的电极阵列获得管道内流体的电导率分布,进而推导出管道内的泥浆密度,具有无辐射、全场测量及实时可视化的优点.电阻层析成像测量系统经过特殊设计,可适应从内陆淡水到海水的巨大电导率变化.初步测试表明,电阻层析成像测量数据与射线密度计具有良好一致性,具备了作为在线泥浆密度测量的可行性.此外,ERT可提供实时的流动成像,对于提高对疏浚管道监测能力和降低堵管概率具有重要意义.     

淀粉预糊化温度对肉粉肠品质特性的影响和机制研究

绿豆淀粉的预糊化是肉粉肠区别于其他熏煮香肠的关键加工工艺，因此，预糊化淀粉的温度对产品的品质至关重要。本研究将绿豆淀粉分别用75、85、95 ℃的热水进行预糊化后制备肉粉肠，探讨不同的预糊化温度对产品品质和淀粉糊化度（Degree of Starch Gelatinization，DSG）的影响。实验结果表明，随着预糊化淀粉温度的升高，肉粉肠的DSG和乳化稳定性显著增加（P<0.05），蒸煮损失显著降低（P<0.05），且大量自由水向不易流动水转变。同时，随预糊化淀粉温度的增加，肉粉肠的硬度、回复性、弹性、脆性、咀嚼性、致密性和亮度值（Lightness，L*）均显著增加（P<0.05），促进产品最终品质的形成。总体可接受评分在95 ℃的预糊化温度时达到最高（P<0.05）。此外，聚类分析（Hierarchical Cluster Analysis，HCA）结果表明，95 ℃的预糊化温度对肉粉肠的品质特性有上调的影响。综上所述，95 ℃是提高肉粉肠品质的最佳预糊化淀粉温度。     

Total Focusing Method Approach of Ultrasonic Phased Array Based on Compressed Sensing

Russian Journal of Nondestructive Testing - Nondestructive testing and evaluation technology of the total focusing method (TFM) based on full matrix capture (FMC) is a hot spot in the current array...     

Use of Time Series Analysis to Evaluate the Impacts of Underground Mining on the Hydraulic Properties of Groundwater of Dysart Woods,Ohio

Mine Water and the Environment - Dysart Woods is the largest (≈ 23&nbsp;ha) old-growth forest in southeastern Ohio. It was donated to Ohio University for research purpose and public...     

Electrostatic-lenses position-sensitive TOF MCP detector for beam diagnostics and new scheme for mass measurements at HIAF

A foil–microchannel plate(MCP) detector,which uses electrostatic lenses and possesses both good position and timing resolutions, has been designed and simulated for beam diagnostics and mass measurements at the next-generation heavy-ion-beam facility HIAF in China. Characterized by low energy loss and good performances of timing and position measurements, it would be located at focal planes in fragment separator HFRS for position monitoring, beam turning, Bρ measurement, and trajectory reconstruction. Moreover, it will benefit the building-up of a magnetic-rigidity–energy-loss–time-offlight(Bρ-△E-TOF) method at HFRS for high-precision in-flight particle identification of radioactive isotope beams on an event-by-event basis. Most importantly, the detector can be utilized for in-ring TOF and position measurements,beam-line TOF measurements at two achromatic foci, and position measurements at a dispersive focus of HFRS, thus making it possible to use two complementary mass measurement methods [isochronous mass spectrometry at the storage ring SRing and magnetic-rigidity–time-of-flight(Bρ-TOF) at the beam-line HFRS] in one single experimental run.